SATEN with a high level of adhesion as a finishing putty is used as a rip cover for all types of paint. SATEN can be applied on the surface of SIVA and drywall. The long service life and plasticity allows the material to be applied with a minimum level of waste. Special additives in the composition inhibit the absorption of water with a solution of SATEN through the substrate. As this is a breathable material, adjusting the humidity of the SATEN results in a healthier environment. The texture of the paste filler SATEN allows you to easily and accurately apply it.

TECHNICAL SPECIFICATIONS

The proportion of water/plaster.............. 6.5-7 liters of water per 10 kg SATEN

Initial drying time .................> 20 minutes

Processing capability ............................ 60 minutes

Final drying time .......... 130 minutes

Coating ........... 1 kg / m2 per each 1 mm of thickness

Compressive strength (min.) ....... 35 kgf / cm2 (4x4 block)

Sifting 160-micron sieve ...............................% 99.5

Sifting 45-micron sieve (min.) ............................% 80

Mass density (powder) ......... 750-800 kg / m3

Dry density ............................... 950-1000 kg / m3

Thermal Conductivity ................................... 0.34 W / mK

Fire classification .................................... A1

STANDARD

Standard ......................................... TDS-31377-2008

Type of ................................................. .. B4 / 20/2 Light gypsum plaster

PACKAGING

Type ................................... Polypropylene bag

Weight ................................................. ................ 30 kg ±% 1

Write a review

Note: HTML is not translated!
    Bad           Good

SATEN FINISHING PUTTY

  • Brand: Liber Leo
  • Product Code: -
  • Availability: In Stock
  • 0.00$/т
- +